Display : 3 1/2 digits LCD display， maximum reading value display 1999 .
Ranges: 1-50，000Lux.
Resolution: 1Lux .
Accuracy: ≤10，000Lux: ±4%rdg±0.5f.s  ≥10，000Lux:±5%+10digits .
Repeatability: ±2% .
Temperature Characteristic: ±0.1%/℃ .
Test rate: 0.4 sec.
Photo detector: one silicon photo diode with filter.
Dimension: 165×67×32mm .
Weight: approx. 155 g (including battery) .

Temperature Range                -30℃～550℃
Accuracy                                  ±2℃ or ±2%
Distance Spot Ratio               12:1
Emissivity adjustable               √
alarm temperature set             √
Maximum / minimum value      √
meanvalue                                 √

SPECIFICATION     
Input Voltage                       AC220V±10%
Output Voltage                    0～30V
Output Current                     0～2A
Source Effect                       ≤0.01%±2mV ≤0.02%±3mA
Load Effect                          ≤0.01%±5mV
Ripple & Noise                    ≤1mVrms ≤3mArms
Display                                 LCD
Display Accuracy                ±1%±1
Operation temperature         :-10℃~40℃:<90%
Deposited Condition            ：-20℃~80℃ ：<80%

Measuring scope 0.01mA~300.0A（50/60Hz）
Accuracy 0.01mA
Accuracy
（below 23℃±1℃，70%RH） 0.00mA~9.99mA:  ±1.2%±5dgt     10.0mA~300.0mA: ±1.5%±5dgt
0.00A~9.99A:    ±1.2%±5dgt       10.0A~99.9A:    ±1.5%±5dgt
100.0A~199.9A:  ±2%±5dgt         200.0A~300.0A:  ±4%±5dgt
Measuring range 30mA/300mA，30A/300A，second-range manual switch，automatic switch in all ranges    
Clamp mouth φ40mm
Power supply DC3V Button-type battery LR-44×2 or SR-44×2
Test mode Clip-on CT，integral mode
 Display mode Four Bits LCD display
Dimension Width × Height× Thickness;
64mm×160mm×23mm
LCD mimension 35mm×21.5mm；display domain;32mm×15mm
Line voltage Line test under AC600V
Sampling rate about 2 times/s
Data storage 60 groups， “FU” symbol flickering means storage is full
Peak holding Peak value capture and holding function， press HOLD button continually to show peak value in the course of testing.
Data holding Data holding function;displayed by “DH” symbol
Overflow display Outrange overflow display;displayed by “OL” symbol
Automatic shutdown After starting up the leaker for 5 minutes， it will shut down automatically to reduce battery consumption.
Battery voltage When battery voltage reduced to 2.5V~2.7V， battery low voltage symbol will filker to remind replacing battery; at this time， measurement accuracy will decrease.
Leaker quality About 120g（with battery）
Working temperature and humidity -0℃~40℃；below 80%rh
Storage temperature and humidity -10℃~60℃；below 70%rh
Insulation strength AC2kV/rms (between core and box)
Rating power About 5mW
Applicable safety rules IEC1010-1、IEC1010-2-032、pollution， etc 2、CAT Ⅲ(600V)
Packing Clamp tester: 1pcs， Box: 1pcs， Rope chain:1pcs

Range　
Measuring Range                      Acceleration:0.1-199.9m/S2 peak(rms*v2)   Velosity:0.1-1999.9mm/s rms  Displacement:0.001-1.999mm p-p(rms*2v2)
Accuracy                                    ±5%±2digits
Frequency Response                Acceleration:10Hz-1KHz(LO) 1KHz-15KHz(HI)  Velosity/Displacement:             10Hz-1KHz