Product Category
-
Multimeter
-
Clamp Meter
-
VoltageTester
-
Thermometer
-
Anemometer
-
Insulation Resistance Tester
-
Tachometer
-
Sound Level Meter
-
Digital Lux Meter
-
Gas detector
-
Thermal Camera
-
Humidity Meter
-
Digital Engine Analyzer
-
oscilloscope
-
Power Supply
-
Special Instrument
-
Accessories
-
Radiation Detector
-
Stroboscope
-
lux meter
-
Thickness Gauge
-
Engine Analyzer
-
Power quality analyzer
-
Wood Moisture Meter
-
Infant and Toddler Health Care Device
-
Acoustic imager
-
Air quality monitor
HOLDPEAK HP-5000N Multifunctional Moisture Meter - Features LED Indicators, Drying and Humidity Symbols, Flashlight Function, and Multiple Measurement Modes
1. LED Indicator light
2. Dry Indicator
3. MID Indicator
4. Wet Indicator
5. Flashlight indicator
6. Battery Power Indicator
7. Wall Mode
8. Masonry Mode
9. Softwood Mode
10. Hardwood Mode
11. Measurement Reading Display
12. Reading Hold Indicator
13. Measurement Reading analog Display
14. Flashlight On/Off Key
15. Mode select Key
16. Reading Hold Key
17. Power On/Off Key
Operation instructions
To power on the meter, press the" " button (To power off the meter, follow the same instruction.)
To measure the moisture level of wall, masonry, hardwood or softwood, press the "MODE" button until the name of that material appears on the LCD. Then scan the material by gently pressing the inductive sensing area on the back of the meter against the material. The LCD will read out the material's moisture content. Simultaneously, one or more bar graph LEDs will illuminate to place the material's moisture level within a spectrum bounded by "dry" and "wet".
To hold a reading, press the "HOLD" button briefly. The display will show the held value, along with a lock icon. If the reading is above the alarm limit for that material, pressing the "HOLD" button will silence the beeper.
Specifications:
|
LCD Size |
52*30 (mm) 12mm high digits |
|
Measurement Ranges |
5-70% for wall 5-70% for masonry 5-75% for soft wood 5-75% for hard wood |
|
Measurement Accuracy |
士4% |
|
Inductive Sensor Size |
1.6X1.6in.(40X40mm) |
|
Display Resolution |
0.1% |
|
Max Sensing Depth (In wood) |
3/4 in.(19mm) |
|
Bar Graph Composition |
3 each green, yellow and red LEDs |
|
LED Bands |
For wall and masonry: green =0-41.9% yellow= 42-52.9%, red≥53% For wood: green=5-11.9% yellow= 12-15.9%, red≥16% |
|
Alarm Levels |
≥16 for wood ≥70% for drywall and masonry |
|
Auto Power Off Trigger |
5 minutes of inactivity |
|
Operating Temperature |
0-40°C (32-104°F) @ 5-95%RH |
|
Storage Temperature |
-10-50°C (14-22°F) |
|
Power Source |
3.7V lithium battery, 400mAh. |
|
Size |
175*72*30 mm |
|
Weight |
128g |
SAUNDERS
WRITE A MESSAGE TO US
Zhuhai JiDa Huapu instrument Co., Ltd
Service Hotline:
E-mail:
Copyright: © 2021 Zhuhai JiDa Huapu instrument Co., Ltd. 粤ICP备2021107311号 Powered by www.300.cn