Home  > PRODUCT  > Non-contact voltage tester  >  Voltage Tester Pen Non-Contact HP-38A
Voltage Tester Pen Non-Contact HP-38A

Voltage Tester Pen Non-Contact HP-38A

Delivery Time
45 days
Port of shipment
Display Type
Digital Only
Get Latest Price
Get the latest price
Quantity Needed:

HoldPeak HP-38A Voltage Tester Pen Non-Contact Volt Professional LED Light Digital LCD Voltage With Low Battery Indication.Non-contact AC/DCVoltage tester HP-38A is easy to use- just touch the tip to a terminal strip, outlet or supply cord;when the tip glows andthe unit beeps, you know there is voltage present. Pressional in measuring the AC/DC Voltage,a good tester that you should not miss.
The pen type digital multimeter can be used to measure DC & AC voltage, resistance, positive diode voltage fall and audible continuity.It is characterized at slim size, portable, stable performance and anti-dropping capacity. Using 2000 counts digit LCD monitor with character 12mm high, they offer clear readings. With overall circuitry design centering on large-scale IC A/D converters in conjunction and over-load protection circuit, the meters give excellent performance and exquisite making as a handy utility instrument.

Brand NameHoldPeak
DIY SuppliesElectrical
Display TypeDigital Only
Model NumberHP-38A
Power SupplyBattery
LCD Voltage Range12-690V AC/DC
LED Voltage Range12-690V AC/DC
Voltage Range50-690V AC/DC
SystemThree-phase 4-wire system AC
Detection Range0-750k
Test CurrentApprox.1.5uA
BatApprox 33mA(Battery 3V measuring 690V AC)
Relative ValueYES
IP RatingIP64

Product details parameters

Voltage Test
LCD Voltage Range12-690V AC/DC
LED Voltage Range12-690V AC/DC
Tolerance(Threhold Voltage)Light on at more than
:7±5V(12V LED):18±5V(24V LED)
:37.5±5V(50V LED):75%±5% of norminal voltage
(120/230/400/690V LED)
High voltage indication(LED indicator)
Voltage Range50-690V AC/DC
Phase Range120±5 degree
Phase rotation test
Detection Range0-750kΩ
Test CurrentApprox. 1.5μA
IP RatingIP64

Product precaution


1 Never take measurements on a circuit in which the electrical potential exceeds 690V.(When the measured voltage exceeds 690V, all the voltage LED displays will light up)
2 Do not attempt to take measurements in the presence of flammable gasses, as the use of the.
3 Never attempt to use the instrument if the surface of your hands are wet. (Do not use in rain.)
4 Keep your hands and fingers behind the barriers during measurements.
5 Never unlock and open the battery case during measurements.
6 Verify proper operation on a known source before taking action as a result of the indication.
7 Never attempt to make any measurement in any abnormal conditions, such as a broken case.or exposed metal parts are present on the instrument or test probes.
8 Do not make any modification to the instrument.
9 Take extreme caution when live circuit LED flashes or lights up.
10 Correct indication of LEDs is only guaranteed within a temperature range of -10℃ up to 55℃(<85%RH).instrument may cause sparking, which could lead to an explosion.

Product certificate

Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...